Description
The newly featured LED has three colors: Blue, Green and Red. The blue and green LEDs are active for the first 15 minutes after the battery is installed or the tamper cover is removed. The blue LED illuminates when the magnet is within the 1 inch specification. Basically this is confirming proper installation of the magnet in relation to the reed switch. The green will flash each and every time the 5800MINI transmits a signal. The red LED is active for 2 minutes after any transmission (a fault or trouble signal from the sensor). The red light will flash once every five seconds when there is a low battery. When the 3V battery reaches 2.3V that will initiate a low battery alert to the panel on the next transmission. At 2V the sensor will be completely dead.
Specifications
Sensor Type: Surface-Mounted Contact
Operating Frequency: 345 MHz
Communication: Non-Encrypted Wireless
Sensor Dimensions: 2.2″L x 1.0″W x 0.3″D
Sensor Weight: 0.4 oz
Magnet Dimensions: 1″L x 0.25″W x 0.25″D
Maximum Magnet Spacing Gap: 0.5 Inches
Magnet Type: Rare Earth N45
Wireless Range: 500+ Feet Open Air
Mounting Methods: Screws or Adhesive Foam Tape
Hardwired Input: No
Battery Type: One (1) CR2032 Coin Batteries
Expected Battery Life: Five (5) to Eight (8) Years
Manufacturer: Honeywell